Eco-friendly lube can protect water turbines

Eco-friendly lube could be on the cards for water turbines, following new research into lubricant additives.

Scientists at the Department of Energy’s Oak Ridge National Laboratory have developed lubricant additives that protect water turbine equipment and the surrounding environment.

According to DOE, roughly 2.47 billion gallons of lubricating oil are consumed in the United States annually for engines and industrial machinery, with about half eventually finding its way into the environment.

While environmentally acceptable lubricants are available, they are not optimized with additives that can significantly improve performance while posing minimal environmental impact if accidentally released. To create nontoxic, biodegradable and high-performing lubricant additives for water power turbines, researchers turned to ionic liquids, or ILs: organic liquid salts that mix well with oil, reduce friction between bearings and gears, and are stable in a range of temperatures.

A team of materials and environmental scientists at ORNL worked to design, synthesize and test top-candidate ILs of ammonium phosphate and phosphonium phosphate that provide a good mix of properties.

When added to base oils, the ILs demonstrated 50% less friction and a tenfold decrease in equipment wear compared to commercially available gear oil while meeting federal standards for environmental toxicity and biodegradability, as described in ACS Sustainable Chemistry & Engineering.

The project builds on more than 20 years of IL research at ORNL, including the development of lubricant additives designed to reduce engine wear and boost vehicle fuel economy.

“Our previous work showed us that you could dramatically increase the performance of lubricants with the addition of just 1% or even a half-percent of ILs,” said ORNL’s Jun Qu, who leads the project and the Surface Engineering and Tribology group at ORNL.

This time, scientists sought to create a nontoxic additive for use in turbines installed in aquatic environments, generating electricity using waves, tides, ocean and river currents. Although ILs are generally less toxic than conventional lubricant ingredients, their environmental impact has not been studied closely.

“On the environmental side, there are three main factors we care about with these lubricants,” said Teresa Mathews, lead for the Biodiversity and Ecosystem Health group at ORNL. “They have to be highly performing. We don’t want them to be toxic to any aquatic organisms, and if there’s a spill, we don’t want the lubricants to be compounds that last in the environment. We want them to degrade very rapidly.”

Pursuing a cleaner formula

The team first sought to eliminate potential toxic elements such as fluorine and chlorine and metals such as zinc and iron from the candidate ILs. They also focused on creating ILs made up of shorter hydrocarbon chains—chains containing fewer than six carbon atoms—which are generally considered less toxic.

“We found a four-carbon chain to be the sweet spot,” Qu said. He added that going shorter than four carbons resulted in an IL that didn’t mix well with oil and was less thermally stable.

Friction testing was accomplished with metal pieces simulating turbine gears and bearings coated with a lubricant containing the IL. The resulting surface wear of the pieces was characterized using electron microscopy at the Center for Nanophase Materials Sciences, a DOE Office of Science user facility at ORNL.

Huimin Luo, a chemist in ORNL’s Manufacturing Science Division who led the chemical synthesis work, said these particular ILs are fairly straightforward to produce and can be easily scaled up for commercialization.

To determine the additives’ environmental impact, ORNL ecotoxicologist Louise Stevenson conducted toxicity and biodegradability tests in ORNL’s Environmental Toxicology Laboratory, where assessments are routinely performed for DOE, the Department of Defense and other agencies. Following Environmental Protection Agency protocols, the toxicity tests used Ceriodaphnia, tiny planktonic crustaceans commonly known as water fleas that sit at the bottom of the food chain, have a short life cycle and rapid reproduction rate, and are highly sensitive to environmental conditions.

Tiny plankton provide big insights into eco-friendly lube

The organisms “are like canaries in a coal mine for aquatic toxicity because they are filter feeders and interact with a lot of water,” Stevenson said. “In a seven-day test, we’ll get three to four rounds of reproduction with daily hatching, so we can look for both lethal and sublethal effects such as reproductive and growth impacts that affect population survival.”

While the environmentally acceptable lubricant base oils did not affect the crustaceans, the commercial lubricant additives and two early IL compounds were highly toxic to the organisms, resulting in 100% mortality within one to three days after exposure. The team’s ultimate designs for short-chain ammonium phosphate and phosphonium phosphate IL additives resulted in 90-100% survival rates after seven days.

The final, top-performing IL-enhanced lubricants were also highly biodegradable compared to standard lubricant additives. Testing involved exposing the compounds to aquatic microbes and then measuring the rate of carbon dioxide production as the microbes broke down the materials.

High-performing, environmentally friendly lubricants designed specifically for marine energy turbines are essential for other reasons, including equipment durability. Qu said that lubricant technology currently used for marine turbines was borrowed from wind turbines, serviced every six to 18 months. However, tidal turbines installed in the ocean or rivers are typically designed for service every six years and operate under much harsher conditions.

The project will next focus on developing IL lubricant additives specifically for use in tidal turbines operating in the ocean and exposed to potential seawater contamination and pressure and temperature extremes.

Eco-friendly lube ‘only at ORNL’

The scientists noted that the project highlights the diverse expertise and capabilities assembled at ORNL to address a broad range of economic, environmental, and societal challenges.

“I love to talk about this project when I’m giving tours of the Aquatic Ecology Lab,” Stevenson said. “This type of work can only happen at ORNL because we have such an interdisciplinary staff. Jun and Huimin developed a compound and brought it to us for toxicity and biodegradability testing. Then, we gave feedback, and everyone worked iteratively to find the greenest chemical possible.

“Green chemistry is a hot topic, and this is an example of actually doing that and working together between materials scientists and environmental scientists to find a solution collaboratively and productively.”

For information on technology licensing or collaborative research, contact ORNL’s Partnerships Office. The project was funded primarily by the DOE Office of Energy Efficiency and Renewable Energy’s Water Power Technologies Office, DOE EERE’s Vehicle Technologies Office, and the DOE and ORNL Technology Innovation programs.

UT-Battelle manages ORNL for DOE’s Office of Science, the single largest supporter of basic research in the physical sciences in the United States. DOE’s Office of Science is working to address some of the most pressing challenges of our time. For more information, visit https://energy.gov/science.

Related Articles:

Send this to a friend